BUGGYPOD COMPATIBILITY

 

Fits the following pushchair models (see note below to ascertain if it fits other models):

 

·        Arrue X-Kape, Buggy, Minus

·        BabyDan Copenhagen, Stockholm, Reykjavik

·        BabyStyle XTS Twin Twister, XTS Twister,  Evo

·        Bebeconfort Elite, Trophy, Trophy Air 4, High Trek, Allegro, Activ

·        Britax Excel, Delta, Trekker, Ultra, Voyaga Ultra

·        Bruin Alpine

·        Bugaboo Cameleon – fits, but pushchair cannot be fully folded due to brackets and, due to the front legs being narrower, Buggypod will point slightly towards centreline of pushchair

·        Chicco CT 01, CT 02, CT 04

·        Cosatto Triton, Swift Lite, Dixie, Comet, Diablo, Solaris, Gogo

·        First Wheels City Elite

·        Graco Quattro Tour, Liberty, Aerosport, Spree, Mirage, Mosaic, Expedition, Citisport, Stadium Duo

·        Hauck Infinity, Roadster, Jet 6, Run 6, Ohio

·        Herqules Raptor and Razor (with extra bracket available from May 2007)

·        I’coo (with extra bracket available from May 2007)

·        Inglesina Espresso, Trip, Allum, Zippy

·        InSTEP Nipper (single)

·        Jane Urban, Powertrack, Powertrack 360, Powertwin, Slalom

·        Jazz Easy -S

·        Knorr Crosser, Slider

·        Little Shield Meribel, Verbier

·        Maclaren Techno, Global, Triumph, Volo, Quest, Ryder

·        Mamas and Papas Pliko Pramette, Pliko P3, A3, Ziko, Pulse, Nipi

·        Mamu 1, 2, 3, 4

·        Marco Sky

·        Micralite (with adaptor bar)

·        Mothercare Phoenix, Trenton, Aulto, Rococo, Citilite, Jive, Atlan

·        Mountain Buggy Urban, Terrain, Breeze (singles only; recent models)

·        Peg Perego Pliko, Pliko P3, A3

·        Phil and Teds Evo; E3

·        Quinny Speedi SX

·        Red Castle CityLink, Whizz, Sport Jogg

·        Retrus Äuglein (with extra bracket available from May 2007)

·        Silver Cross Cruiser, Pop, Compact, Classic Sleepover

·        Teutonia Fun System, Pixxel, Team Alu

·        Urban Detour Glacier, Xtreme, Vortex, Pinnacle, Altitude, Alpine

·        Valco Runabout, Everest

·        X-Adventure Cross-Over, Inmotion 3, Twinco Quick-Silver, Swivel Quick-Silver (pushchair cannot be locked when folded), Researcher (pushchair cannot be locked when folded)

·        Ziko Frankie, Alfie

·        Zooper Hula, Zydeco, Disco, Waltz, Tango, Twist, Boogie

 

* please bear in mind that adding the Buggypod to any twin pushchair creates a very wide and heavy load to push around

 

Not suitable for the following:

 

·        Bebecar X Plus (telescopic front bar prevents bracket attachment), Vector (telescopic front bar prevents bracket attachment), Rversus (telescopic front bar prevents bracket attachment)

·        Bebeconfort Loola

·        Britax Zeta

·        Bugaboo Gecko and Frog

·        Chicco S3

·        Cosatto Duotraveller   (front bar has plastic casing which may mean Buggypod bracket does not fit solidly around it)

·        Emmaljunga Classic Duo Combi

·        Graco Passage

·        InSTEP Nipper (double)

·        Jane Carrera, Twin Two

·        Mamas & Papas Freestyler (front bar has plastic casing), Aria, Twin Aria (rear bar has plastic casing), Venezia, MPX, Orb, O-zon

·        Mothercare Loola

·        Mountain Buggy doubles and triples (Buggypod fits onto the frame, but due to the seats being wider than the frame, it cannot be folded up flush against pushchair)

·        Mutsy

·        Peg Perego Young, Aria, Venezia

·        Quinny Buzz, Zapp, Freestyle

·        Silver Cross Linear, 3D

·        Stokke XPlory

·        Urban Detour Vesta

 

Revelo does not guarantee that the Buggypod will fit every make and model of pushchair, and customers should follow our guidelines in every case:

 

The Buggypod can be attached to most buggies and pushchairs including twin buggies and 3 wheelers.  The strap of the mounting brackets can be tightened around most buggy and pushchair frames.  The frames can be oval, square, round, thick or thin (max. thickness approx 5.5 cm).

 

To assess whether the Buggypod will fit your pushchair, you should check that there are exposed fixture points on two major frame bars on the right hand side of your pushchair.  These need to be approximately 350mm-425mm from the floor and 160mm-375mm apart (the width can be extended by up to 160 mm using the connector bar adapter included).  You cannot fit the bracket around two parallel telescopic bars, as the bars may slide alongside each other when folding the pushchair or may move away from each other when folding pushchair.  You can fit the bracket on one telescopic bar if there is sufficient gap between the bars.

 

Check that the mounting brackets, once fitted, do not interfere with the braking system or folding mechanism of the host pushchair.

 

Check that the bar to which you are fitting the bracket is vertical (looking from the front), so that the bracket and Buggypod will sit vertically too.

 

The front bracket can be fitted slightly higher than the rear bracket if it helps achieve a good connection. The net result will simply be that the Buggypod seat tilts back slightly (as with many pushchairs) and you may in any case prefer that.

 

If you are still unsure about whether the Buggypod will fit your pushchair, call our Helpline on 0870 850 3463 and we shall endeavour to advise you.  We also recommend that you ask your local retailer to advise or help on fitting.